Super Duty High Power Electrofusion Machine

When a job demands continuous electrofusion welding hour after hour in harsh conditions, our High Power Electrofusion Machine is built for it. Rated at 7500W, this heavy-duty welder handles EF sockets up to 3.5 metres in diameter and performs reliably in temperatures from -15°C to over 50°C. At just 42kg with 4-metre welding leads, it delivers serious output without becoming a two-person job to move around site.

Why Choose This High Power Electrofusion Machine

Mining, civil, and pipeline crews need equipment that won't quit halfway through a shift. This high power electrofusion machine is the largest in our fleet, purpose-built for teams running back-to-back welds on large-diameter HDPE and PP pipe. Many operators keep one in their fleet specifically to cover unexpected large-fitting jobs that smaller welders can't handle.

Key Specifications

• Output: 7500W
• Weight: 42kg
• Welding leads: 4 metres
• EF socket capacity: up to 3.5m diameter
• Voltage range: 8V–48V
• Operating temperature: -15°C to 50°C+
• Weld memory: 2,000 records

Built-In Safety and Control Features

Every Advanced Piping electrofusion machine is CE approved. This high power electrofusion machine adds twin circuit breakers and a dedicated electrical safety circuit, giving crews an extra layer of protection on demanding sites. Large assisted cooling fans keep the controller running at full capacity under load and in high ambient temperatures, so output doesn't drop off during long welding sessions.

Programming and Data Logging

Weld programming can be done manually or via the Bluetooth barcode scanner, which reads any known electrofusion fitting within the 8–48 volt range. Every weld is logged automatically, with onboard memory storing up to 2,000 weld records for QA and compliance documentation.

Fitting Instructions

1. Prepare the pipe: clean and scrape the fusion zone to remove oxidation and contaminants.
2. Clamp and align the pipe ends inside the EF fitting.
3. Connect the welding leads to the fitting terminals.
4. Scan the fitting barcode or enter weld parameters manually.
5. Run the weld cycle and allow the joint to cool for the specified time before handling.

Full welding parameters should always follow AS/NZS 4130 and manufacturer fitting instructions.

How It Compares

If your project needs a portable option instead, the EFuze Heavy Duty Battery Welder is worth comparing.